Original post link

[Link] @清风南辞的动态...

[Review of Some Issues Encountered]

Question 1Stress relief issues [somewhat dumb issues]

All files should be stored in internal storage, not in data. Why do so many people like to put them in the MT Manager's private directory? No permission to run them? Files need to be extracted.

Question 2Pairing issuesIntellectual disability issues

Do not use Chinese colons for colons:To enter the English colon:[Distinguish between the colon and this gold coin space]

Question 3Step five: How do you proceed to the next step?
I don't know why you don't show it, but I'm normal

Some people are like this

Normally, it shows like this

Enter $(find /data/app -name libksud.so | grep “me.weishu.kernelsu” | head -n 1) \ then press Enter

[Then enter late-load –allow-shell –package-name me.weishu.kernelsu and press Enter. At this point, the KSU mask will show jailbreak.]

[If the toolbox is not working properly, you can open the MT terminal and first enter su to obtain root permissions, then enter the two commands mentioned above. [Third question, first image] The command means to give KSUrootPermissions, abbreviated as jailbreaking. ]

Question 4Shows jailbreak failure

After a successful soft reboot, I found that the wallpaper had changed to this

Do not open KSU and click jailbreak, or you will see the situation shown in the image below and need to start over
Open MT Manager and enter two commands in the fifth step,See details for detailsQuestion 3

If this happens, it means the root privileges have been unprotected by vivo's vi.ko reverse root, so you need to redo it. When entering commands, do so as early as possible to avoid detection. I understand personally

Question 5preload.so problem

It should be a problem with the preload file. Use Shizuku to authorize the MT Manager to enter the /data/local/tmp/ directory to delete the preload.so, then execute step three

Question 6⚠️: Key issue, regarding the implementation of the fourth step
[Currently, to improve the success rate, when executing step four, keep the screen off and wait one minute. If a red error appears, execute it again, until you restart. If the wallpaper changes after restarting, you've succeeded, and you can proceed to step five. If it doesn't restart after running and the last line shows UID=2000, it fails. Go back to step four to try again. If a long yellow text appears, exit and execute step four until it restarts. Repeat step four several times to succeed—this depends on luck] ❌❌❌❌ has expired

New solutions correspond to new solutionsScriptExecute the fourth step: If the screen is off and wait 5 seconds to turn it back on, repeat the steps. If there is no screen off, don't turn off the screen until it finishes. After the script finishes, a green output will appear afterward, and you need to rerun

[The above diagram shows half success].
24/1The display shows a series of yellow characters in this case
[System freeze and restart scenario]

[Manually turn off the screen in the area I circled, wait 5 seconds, then reopen and wait for the script to run. If some yellow characters appear below, it means it succeeded. If a long string of yellow characters appears, it means it failed and needs to be rerun.]

24/1If a string of yellow characters appears like this, you need to exit manually and rerun until the yellow output characters shown above appear, after which the system will automatically soft-restart

[A red error ❌ is also an error
Usually, wait until it finishes running to see if it restarts. If this error repeats, proceed to step four.

The front is green,24/1It shows a series of yellow characters, like this
You can simply exit and restart step four

Successful execution display diagram

[This is what counts as success. Since normal restarts and you can't take screenshots, I used the method of using two devices for screenshots. See details for details.]Images and text on how to add temporary r-style to your vivo iQOO device..." target=”_blank” rel=”nofollow”>Text and imagesHow do you install temporary r-on your vivo iQOO device...Author@传佳

Soft restart check indicatorObserve if green appears below the restartAndroidicon. If it appears, it means a restart. If it fails, you have to start over. If only the qioo icon appears, the soft restart is successful.
You can see the wallpaper changes, as shown in the picture

New script linkCurrent script link [currently using it without bugs], please uncompress and enjoyNo second revision of the 🚫 scriptRecently, I saw someone on KS re-editing without crediting the original author

[Link] 123 Cloud Drive

After the fourth step, a script will be generated, and the script log can be sent to Doubao for research

preload.so use this big shot's one@悦玖玺

[Link] @悦玖玺的动态...

Supported models【iqoo13 neo11 neo10pro+, iQOOZ10 Turbo Pro universal [for the author's device]]

For other models, if a skilled user creates preload.so can replace the preload.so in the folderStop asking →_→

Because the success rate of a single device is low, it's unclear how to evade vi.ko's detectionIf anyone knows, let me know.

If you have two machines, you can use another methodThe success rate is high

[Link] @一加ace3oro的图文...

Author@一加ace3oro

[Link] @传佳的图文...

Author@传佳

You can also use the one developed by this big shot@Appea

[Link] @Appea updates...

[Finally, give a like. 👍🏻 Making it wasn't easy. If you have any other problems or solutions, feel free to share.]】

◉‿◉ ◉‿◉ ◉‿◉